No. This is the biggest myth about DIY pools. When you buy a pool kit from Swimming Pool Kits Direct, you get the shell, the equipment package, the engineering drawings and delivery to your kerb. The "DIY" part is the project management: choosing your trades, booking them in order and keeping the job moving.
That's the role a pool builder normally charges a margin for. Customers who manage their own build typically save $10,000 to $30,000 compared with a fully installed pool of the same size. If you would rather hand it all over, read our comparison of DIY vs installed fibreglass pools first.
And the coordination itself is smaller than people expect. As we explained in The $25,000 Phone Call, it mostly comes down to a handful of calls made at the right time.
Here is every trade and service on a typical inground fibreglass pool kit build, in the order you'll need them.
| # | Trade or service | What they do | When to book | What to ask for |
|---|---|---|---|---|
| 1 | Private certifier or council | Assesses and approves your pool plans (using the engineering drawings in your kit) | The week you order your pool | Approval pathway for your site (e.g. CDC or DA in NSW) |
| 2 | Before You Dig Australia (BYDA) | Free check for underground services before excavation | Before the excavator is booked | Service plans for your address |
| 3 | Excavator operator (plus tipper trucks) | Digs the hole and plumbing trenches; removes spoil | 2 to 4 weeks before delivery [CONFIRM typical lead time] | Rock clause, spoil removal price, machine access width |
| 4 | Crane hire | Lifts the shell from the truck into the hole | Lock in once delivery date is confirmed | Reach, access, power lines, operator included |
| 5 | Licensed plumber | Connects skimmer, returns and filtration equipment | Same day or shortly after the shell is placed | Licence number; pool experience |
| 6 | Licensed electrician | Powers pump, chlorinator and lights; equipotential bonding | Alongside the plumber | Licence number; electrical compliance certificate |
| 7 | Concreter | Bond beam around the shell; can also do coping and paths | After backfill | Experience with fibreglass bond beams |
| 8 | Pool fencer | Installs a compliant pool barrier | Quote early, install before the pool is filled for use | Compliance with your state's standard |
| 9 | Paver, tiler or landscaper | Coping, surrounds, decking and planting | Last, once fencing lines are set | Non-slip finishes; drainage away from the pool |
Getting the order right is where most of the time is saved. Our pool installation guide breaks the build into eight stages: site preparation, excavation, base material, shell delivery, plumbing and electrical, backfilling, bond beam and coping, and pool set-up. Here's how the trades line up against those stages.
A fibreglass pool can be installed in as little as 7 days once work starts. For a realistic week-by-week view, read how long it takes to install a fibreglass pool.
Pro tip: Start your fencing quote and your certifier enquiry the same week you order your pool. They are the two steps most likely to add weeks if you leave them until the shell arrives.
Plumbing and electrical work must be done by licensed trades in every state. Beyond that, the rules depend on where you live and how much the work is worth.
NSW: Residential building work over $5,000 must generally be carried out by a properly licensed contractor. If you act as an owner-builder and manage residential building work valued at more than $10,000, you need an owner-builder permit.
QLD: Pool builders and installers generally need the appropriate QBCC licence for swimming pool construction, installation or maintenance. An owner-builder permit is required for building work valued at more than $11,000 including GST.
VIC: If domestic building work is valued at more than $16,000, you need a Certificate of Consent from the Building and Plumbing Commission Victoria before acting as an owner-builder.
ACT: Check owner-builder and contractor licensing requirements with Access Canberra before starting pool work.
Thresholds and rules change, so always confirm with your certifier or the state authority before you book. If you're in NSW, our NSW pool registration guide walks through approval, fencing, certification and registration. Queensland buyers can read our QLD pool safety certificate guide.
Knowing where the kit ends and the trades begin stops surprises on your budget.
| Included in your SPKD kit | Booked by you (trades) |
|---|---|
| Fibreglass pool shell | Approval and certification |
| Equipment package (Filtration, chlorination, pump etc) | Excavation, spoil removal and base |
| Certified engineering drawings for your approval | Crane hire |
| Delivery to your kerb | Plumbing and electrical connection |
| Support from the SPKD team | Bond beam, fencing, paving and landscaping |
For the full breakdown, see what's in an inground pool package and compare equipment packages.
Get two to three quotes for each trade. Prices vary widely by region and site access.
That's fine too. You still get the same shell, the same equipment and the same price on the kit. The SPKD team can talk you through your options for your area and get you in contact with an installer. Most customers find that once the certifier and excavator are booked, the rest falls into place.
Tell us which pool you're looking at and where you live. We'll send you a full kit price and help you map out your trades.